|Place of Origin:||Qingdao|
|Certification:||GS, RoHS, CE, ISO9001|
|Minimum Order Quantity:||1 pieces|
|Packaging Details:||wooden case, carton box|
|Delivery Time:||15-25 work days per year|
|Payment Terms:||T/T, Western Union, D/P, D/A, L/C|
|Supply Ability:||50000 pieces|
|Temperature:||Normal Or High Temperature||Action Type:||Single Acting|
|Rod Material:||Steel, Or On Request||Cylinder Tube OD:||9.12’’ Or Custom|
|Rod Size:||Custom||Largest Moving Stage Diameter:||8.00’’ Or Custom|
|Stoke:||176.50'' Or Custom||Oil Capacity Fill Gal(L):||4.6(17.8)|
2 3 4 Stage Telescopic Parker Hydraulic Cylinder Single Acting Longer Bearing Length
Single acting cylinders transfer force and motion in one direction only; good quality and low noise; the oil way design perfectly and can save the energy, avoid wast; acts on the piston to push the piston rod out
|Mode||84-4466-180-8 or other mode|
|Cylinder Tube OD||9.12'' or custom|
|Operating Pressure||2,000 psi, 2500psi, 3000psi, 3500psi, 4000psi|
|# of Stages||2, 3, 4, 5, 6|
|Largest Moving Stage Diameter||8.00'' or custom|
|Stoke||176.50'' or custom|
|Base Mount Width||9.50''|
|Base Mount Diameter||2.12''|
|Plunger Mount Diameter||2.03''|
|Oil Capacity Fill Gal(L)||4.6(17.8)|
|Oil Capacity Extended Gal(L)||25.9(100.4)|
|Piston rod||Material: 35#, SAE1045(45#), 35CrMo, 42CrMo4, etc.|
|Technical Treatment:Quenched and tempered. 1.5-1mm, or 1.03mm per millimetre.|
|Seal kits||Hallite, NOK, SKF, Parker etc.|
Can be customized, often using standard export wooden case packing
|Delivery time||We are factory and can assure the prompt delivery time|
Pre-loaded v-packing with a self-adjusting wave
Spring energizer to maintain a continuous force on the packing
Threaded head nuts for added strength and field seal adjustment
Longer Bearing Length (overlap) for stability
The single acting telescopic hydraulic cylinders produced in DALLAST company are mainly used on: tipping trailer; dump truck; side tipping vehicle;compressed equipment,etc.
When manufacturing multistage cylinders, the number of stages are able to produce, which is limited only by the physical confines of the cylinder requirement; samples can be provide to you before starting cooperation; the most commonly used mounting options are flange, trunnion, clevis, pin-eye, cross-tube, spherical, and tang. Cylinder mounting is chosen based upon the application’s requirements.
1. We have professional quality control department,every step from raw material to finished product
is in the same factory,each procedure will be tested by professional inspector.
2. Before hydraulic cylinder is assemblied , every spare parts would be measured and cleaned .
After hydraulic cylinder is assemblied , Pressure test would be carried out one by one.We ensure the
testing pressure is 30%-50% higher than rated pressure in almost one hour's test.Each hydraulic
cylinder must be tested without any leakage.
Cylinder designs include welded and screwed type, welded and bolted, fully bolted or tie rod or can take the form of your drawing entirely.
And we can OEM & ODM, If you are interested in our hydraulic RAM, please feel free to contact us.
Contact Person: Candy